Specifications — SVDA 6 A MX Distribution Amplifier
Video
Gain ................................................ Unity
Bandwidth ..................................... 30 MHz (-3 dB)
Frequency response .................... < 0.1 dB @ 15 MHz
Differential phase error .............. 0.03° at 3.58 MHz and 4.43 MHz
Differential gain error ................. 0.05% at 3.58 MHz and 4.43 MHz
Crosstalk ....................................... -60 dB @ 3.58 MHz
Video input
Number/signal type ................... 1 S-video
Connectors ................................... (1) 4-pin mini DIN female
Nominal level ............................... 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum/maximum levels ....... Analog: 0.4 V to 1.4 Vp-p with no offset at unity gain
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
Video output
Number/signal type ................... 6 S-video
Connectors ................................... (6) 4-pin mini DIN
Nominal level ............................... 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum/maximum levels ....... 0.4 V to 1.4 Vp-p
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset ....................................... 5 mV with input at 0 offset
Sync
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain ................................................ Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response .................... 20 Hz to 20 kHz, 0.05 dB
THD + Noise ................................. 0.03% @ 1 kHz at nominal level
S/N ................................................ >90 dB, output 21 dB, balanced, at maximum output (unweighted)
Stereo channel separation .......... >80 dB @ 1 kHz; >60 dB @ 20 kHz
CMRR ............................................ >75 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ................... 1, 2, or 4 stereo balanced (Hi Z or 600 ohms), unbalanced (Hi Z)
Connectors ................................... (1, 2, or 4) 3.5 mm captive screw connector, 5 pole
Impedance .................................... >25k ohms balanced, 50k ohms unbalanced, DC coupled
Maximum level ............................ +24 dBu (balanced or unbalanced) at 1%THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type ................... 6, 12, or 24 stereo, balanced/unbalanced
Connectors ................................... (6, 12, or 24) 3.5 mm captive screw connector, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ..................................... 0.1 dB channel to channel
Maximum level (Hi-Z) ................ >+24 dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm) ......... >+15 dBm, balanced or unbalanced at 1%THD+N
1-2
SVDA 6 A MX Distribution Amplifier • Specifications
|
Compaq Projector iP 60E User Manual
Cortelco Telephone CENTURION User Manual
Craftsman Model Vehicle 14063 User Manual
Cuisinart Coffeemaker EM 350 User Manual
Curtis Conference Phone TID970 User Manual
Euro Pro Carpet Cleaner EP961 User Manual
Euro Pro Fryer K4320 User Manual
FEIN Power Tools Impact Driver ASB 658 1 User Manual
GE TV Converter Box 22729 User Manual
Gigabyte Network Card GN MD01 User Manual